Buying · September 12, 2026
The used-car test drive checklist
A test drive is your chance to catch what photos and paperwork can't. Drive it like you're looking for reasons not to buy.
Last updated: September 12, 2026
Before you turn the key
Start the car cold if you can — some problems only show on a cold start. Check for smoke on start-up, listen to the idle, and confirm the VIN on the dash matches the door jamb and registration before you go anywhere.
On the drive
Drive on varied roads if possible. Listen for knocks, whines, and clunks; feel for a transmission that shifts smoothly; test the brakes for pulling or vibration; and check the steering for play or noise. Take a route with a hill and, if you can, some highway speed.
Check every system
Run the heating, air conditioning, defrost, lights, wipers, windows, and infotainment. Watch the temperature gauge and every warning light — a light that clears just before viewing and reappears on the drive is telling you something.
After you park
Look under the car for fresh leaks, feel the wheels for uneven heat that can hint at a brake problem, and note anything the drive raised. Then take it — and everything you found — to an independent inspection before you commit.
Frequently asked questions
- What should I check on a used-car test drive?
- Start it cold, listen for engine and transmission noises, test the brakes and steering, run every electrical system and climate control, and watch the temperature gauge and warning lights. Drive varied roads, including a hill and some highway if you can.
- How long should a test drive be?
- Long enough to drive varied conditions — city, hill, and highway — and to let the engine reach operating temperature, since some problems only appear once the car warms up. A quick loop around the block isn't enough.
- Does a good test drive replace an inspection?
- No. A test drive catches behaviour; an inspection catches condition, including things you can't see or feel from the driver's seat. Do both, in that order.